HTM 02 compliant
Suitable for interior and external use
The pipeline should be adequately supported at sufficient intervals in accordance with the below table to prevent sagging
or distortion. Supports for the surface-mounted pipework should provide clearance to permit painting of the surface.
Where it is essential for pipes to cross electric cables or conduit, they should be support at intervals either side of the
crossing to prevent them from touching the cable or conduit. Supports should be of suitable material or suitably treated
to minimise corrosion and prevent electrolytic reaction between pipes and supports.
Brass
12mm – 159mm
M10
| Outside diameter (mm) | Maximum interval between supports (m) |
| Up to 15 | 1.5 |
| 22 – 28 | 2.0 |
| 35 -54 | 2.5 |
| > 54 | 3.0 |
Hospital Bracket (Plumbing)
